Ceram Core piping is specifically designed for the severe abrasion conditions caused by sharp angular particles in high flow streams. Most noticeable is its successful service in handling bottom ash. Other typical services are sand lines, fly ash lines and mine tailings.

Silver Streak pipe is filament wound using epoxy resin and fiberglass reinforcement. Manufactured with a proprietary blend of abrasion-resistant additives, it is offered with a standard 80 mil nominal liner. Custom liner thicknesses are available on special request.

Silver Streak LD pipe and fittings are available in 30″ through 48″ diameter sizes with static pressure ratings up to 150 psig operating up to 200ºF and full vacuum ratings.

CERAM CORE

There are many advantages to choosing Ceram Core pipe. For example, the pipe outlasts carbon steel, cast iron and special alloys under equal conditions. Its unique combination of ceramic beads and epoxy resin exhibits excellent corrosion resistance. Ceram Core is easy to install due to its light weight for quick installation with less manpower. Maintenance is low due to longer wear of the pipe before rotation and the pipe resists internal and external corrosion.

 

SILVER STREAK

There are many advantages to choosing Silver Streak pipe:

• Entire 80 mil nominal liner contains 80 percent resin/abrasion resistant additives and 20% reinforcement.
• Designed to operate at temperatures up to 225°F and pressures up to 225 psig.
• Rated for full vacuum service at 175°F.
• Complete line of standard fittings , including long radius elbows, available—constructed with the same abrasion-resistant additives as the pipe.
• Pipe comes spigot x spigot in 2” through 12” sizes and spigot x spigot or bell x spigot in 14” through 24” sizes.
• Custom-fabricated assemblies are available upon request.

 

SILVER STREAK LD

• Standard sizes include 30″- 48″ diameters
• Operating temperatures up to 200ºF
• Operating pressures up to 150 psig
• Full vacuum service
• Custom-fabricated assemblies are available.