Bondstrand 4000

CBondstrand 4000 piping system is designed for aggressive chemical service where epoxy products are suited (solvents, alkalis and non-oxidizing acids).

Description

Bondstrand 4000 piping system is designed for aggressive chemical service where epoxy products are suited (solvents, alkalis and non-oxidizing acids). Meets USFDA requirements for food processing un 21CFR175.105 and 21CFR177.2880. Quick-Lock joining system allows close tolerance fabrication of system. 

Features / Benefits

Filament-wound Glassfiber Reinforced Epoxy (GRE) pipe with Quick-Lock adhesive-bonding systems for close tolerance systems. Aromatic Amine cured epoxy for high toughness and temperature performance.  A wide range of lined filament-wound Glassfiber Reinforced Epoxy (GRE) fittings are available. For special fittings not listed in the product guide, please contact your Fiber Glass Systems representative.

Specifications

BONDSTRAND 4000

Size Range: 
1″-16″ (25 mm – 400 mm)

Inner Corrosion Barrier: 
0.050″ (1.3 mm) resin-rich reinforced liner

Pressure Ratings: 
150 psi. (10 bar)

Pipe Construction: 
Reciprocal Filament Wound, Aromatic Amine cured Epoxy

Temperature Range: 
-40°F – 200°F (-40°C – 93°C)

Joining Method: 
Quick-Lock Adhesive Bonded

Fittings: 
Filament Wound with integral Quick-Lock Socket ends. Single-piece Flanges

Chemical Service:
Acid drains, chemical processes, slurries, food processing, non-oxidizing chemicals and acids

 

SILVER STREAK

Size Range:
2″- 48″

Inner Corrosion Barrier:
70 – 100 mils abrasion resistant liner

Pressure Ratings:
2″- 24″ – 150 psig / 10 bar

Temperature Range:
Up to 225°F / 107°C

Fittings:
Bell & Spigot or Butt & Wrap

Service:
Abrasive and corrosive service applications such as limestone and gypsum slurries in flue gas desulfurization (FGD) scrubbers.

Construction:
Filament wound with epoxy or vinyl ester resin and fiberglass roving with special abrasion resistant liners.

 

SILVER STREAK LD

Size Range:
30″ – 48″

Inner Corrosion Barrier:
100 mils abrasion resistant liner

Pressure Ratings:
30″ – 48″ – 225 psig/ 15 bar

Temperature Range:
Up to 200°F / 93°C

Fittings:
Flanges or Butt & Wrap

Service:
Abrasive and corrosive service applications such as limestone and gypsum slurries in flue gas desulfurization (FGD) scrubbers.

Construction:
Filament wound with epoxy or vinyl ester resin and fiberglass roving with special abrasion resistant liners.

Location

Cesta zmage 35b
1410 Zagorje ob Savi, Slovenia

Phone

Tel.: +386 31 364 610

Email

info@geopipe.si

Send A Message

1 + 6 =